Shop
PVC Clamp
PVC Clamps are lightweight and durable fastening components used to secure PVC and CPVC pipes in plumbing, electrical, and mechanical installations. Manufactured from rigid PVC materials to ASTM and DIN standards, they provide corrosion resistance and non-conductive properties. Available in standard, double, snap-fit, and adjustable types, PVC clamps ensure quick and secure installation. They are resistant to moisture, chemicals, and UV when made from stabilized grades. They are widely used in water supply, electrical conduit systems, HVAC piping, and chemical installations.
PVC Coated Wire Rope
PVC Coated Wire Rope is a steel wire rope sheathed in a protective PVC layer for enhanced durability and weather resistance. It is manufactured to ASTM, DIN, and ISO standards using galvanized or stainless steel wire cores. The PVC sheath prevents abrasion and corrosion while providing a smooth, safe surface for handling and installation. Available in clear or colored coatings, it is widely used in fencing, marine, sports equipment, construction, and general rigging. This rope combines strength, flexibility, and long service life, making it suitable for both indoor and outdoor applications.
PVC End Cap for Strut Channel
PVC End Cap for Strut Channels are protective fittings designed to close the open ends of strut profiles. They are manufactured from durable PVC materials to ASTM, DIN, and ISO standards, ensuring strength and reliability. These caps provide edge protection, prevent dirt ingress, and offer a safe, clean finish to installations. Available in standard, reinforced, and colored variants, they are suitable for both indoor and outdoor applications. They are widely used in HVAC, electrical supports, mechanical framing, cable management, and modular strut channel systems.
PVC Hex SDS Screw
PVC Hex SDS Screw Caps are protective and decorative covers designed for hex head SDS screws. They are manufactured to ASTM, DIN, and ISO standards using high-quality PVC materials. These caps prevent corrosion and contamination while providing a clean and professional finish to exposed screw heads. Available in white, off-white, beige, and grey, they are widely used in architectural, furniture, and construction applications. They offer both functionality and aesthetics, making them ideal for visible installations where screw heads must remain discreet.
PVC Round & Square Cap
PVC Round and Square Caps are protective and decorative covers designed to seal the open ends of tubes, pipes, and structural posts. They are manufactured to ASTM, DIN, and ISO standards using high-quality PVC, nylon, or polypropylene materials. These caps prevent moisture, dust, and corrosion while providing a smooth and safe finish to exposed ends. Available in a wide range of sizes and in both round and square shapes, they suit structural, fencing, and furniture applications. They are widely used in construction, scaffolding, fencing posts, furniture manufacturing, and general engineering projects.
PVC Round Pipe Plug
PVC Round Pipe Plugs are protective and sealing fittings used to close the open ends of round pipes. They are manufactured to ASTM, DIN, and ISO standards in rigid or flexible PVC materials. Available in push-fit, threaded, and ribbed types, they provide reliable sealing and neat finishing. With UV stabilized and color options, they are suitable for indoor, outdoor, and industrial piping applications. They are widely used in plumbing, construction, scaffolding, furniture, and general piping systems.
PVC Thread Bar End Caps Red / Black
PVC Threaded Bar End Caps are protective plastic fittings designed to cover and protect the exposed ends of threaded bars and studs. They are manufactured to ASTM, DIN, and ISO standards from durable PVC material. These caps prevent thread damage, reduce the risk of injury, and protect against corrosion and dust. Available in red, black, or custom colors, they provide both functional safety and a neat finish to exposed bars. They are widely used in construction, scaffolding, fencing, automotive, and general engineering applications.
Quick Lock Washer
Quick Lock Washers are advanced locking elements designed with wedge-locking action to prevent loosening of bolted joints under vibration or shock. They are manufactured to ASTM, DIN, and ISO standards in hardened steel, alloy steel, or stainless steel. The dual-washer design creates opposing wedge angles with serrated surfaces, ensuring the bolt remains secure even under extreme dynamic loads. Available with zinc flake, stainless, or black oxide finishes, they provide high corrosion resistance and long service life. They are widely used in railways, wind turbines, heavy machinery, automotive, and critical safety applications where bolt loosening is unacceptable.
R Pin
R Pins, also known as Hairpin Cotter Pins, are spring steel fasteners used for securing clevis pins, hitch pins, and shafts. They are manufactured to ASTM, DIN, and ISO standards in carbon steel or stainless steel. The single eye design provides a simple grip, while the double eye type offers better handling and higher spring retention strength. With zinc, galvanized, or stainless finishes, they ensure durability and corrosion resistance for indoor and outdoor use. They are widely used in automotive, agricultural, construction, and general engineering applications.
Rail End Cap
Rail End Caps are protective fittings designed to close the open ends of handrails, guardrails, and structural tubing. They are manufactured to ASTM, DIN, and ISO standards in carbon steel, stainless steel, aluminum, and PVC materials. These caps protect against corrosion, debris ingress, and sharp edges while improving the safety and appearance of rail systems. Available in press-fit, weld-on, threaded, and push-in styles, they suit both industrial and decorative applications. They are widely used in fencing, handrails, balustrades, guardrails, and structural tube assemblies.
Rapid Clamp
Rapid Clamps are heavy-duty quick-action clamps designed for scaffolding and formwork systems in construction and industrial projects. They allow faster assembly and dismantling compared to standard clamps while maintaining high load capacity and safety compliance. Manufactured to ASTM, DIN, and EN standards, they are available in wedge-type, swivel, and right-angle variants. These clamps are hot-dip galvanized, zinc plated, or stainless steel for durability in harsh site environments. They are widely used in concrete formwork, scaffolding frameworks, and heavy construction where speed and reliability are critical.
Riser Clamp
Riser Clamps are structural pipe supports designed to support vertical piping systems by carrying the load at each floor penetration or structural slab. They are manufactured to ASTM, DIN, and MSS standards and are available in carbon steel, stainless steel, and heavy-duty alloy options. Riser clamps distribute the weight of the pipe and its contents to the building structure, preventing stress on fittings or joints. Hot-dip galvanized or stainless steel finishes ensure durability and corrosion resistance. They are widely used in plumbing, HVAC, fire protection risers, and industrial vertical piping installations.
