Grating Clamp / Grating Fixing Clip – Supplier in Dubai UAE

A grating clamp fixes steel grating panels to their supporting beams without welding or drilling. The clamp hooks under the flange of the beam, a saddle sits over the bearing bar of the grating, and a bolt pulls the two together. That is the whole mechanism, and it is exactly why contractors specify clamps instead of site welds: panels stay removable, the galvanized coating stays intact, and no hot work permit is needed.

Unifastener Industries LLC manufactures and stocks grating clamps in Umm Al Quwain, UAE, and delivers across Dubai, Abu Dhabi, Sharjah and the wider GCC. Most standard sizes ship from stock.

Types we supply

• Standard two-part grating clips (top saddle + bottom hook) for 25 mm to 50 mm bearing bar depth
• Four-part assemblies with M6, M8 or M10 bolt, nut and washer included
• Heavy-duty clamps for platforms carrying wheeled traffic or vibration loads
• Stainless steel sets for coastal and offshore work where zinc coating alone will not last

How to order the right clamp

Three measurements decide the clamp: the bearing bar depth of your grating (25, 30, 40 or 50 mm are the common ones), the flange thickness of the beam it sits on, and whether the panel needs to come out again for cable or duct access. Send us those three details on WhatsApp or through the quote form and we will confirm the correct clip the same working day. If you are not sure of the bearing bar depth, a photo with a tape measure across the panel edge is enough.

Standards:
– ASTM A36 / A307 (carbon steel for clamp bodies)
– ASTM A123 / A153 (hot-dip galvanizing standards)
– ASTM A240 / A276 (stainless steel sheet & bar)
– DIN EN ISO 1461 (hot-dip galvanizing)
– DIN 24531 (industrial clamp reference)

Grades:
– Carbon steel: ASTM A36, A307
– Stainless steel: A2 / A4 (AISI 304 / 316)
– Alloy steel (for heavy-duty load conditions)

Material Options:
– Carbon steel (zinc plated, hot-dip galvanized, powder-coated)
– Stainless steel (polished or brushed finish)
– Ductile iron (heavy industrial applications)

Size Range:
– Suitable for grating thickness: 20mm to 50mm
– Bolt sizes: M6 to M12 (or 1/4″ to 1/2″)

Types:
– Standard grating clamp (top saddle, lower plate, and bolt assembly)
– Swivel grating clamp (adjustable for different bar orientations)
– Weld-free grating clamp (for temporary or removable installations)
– Heavy-duty reinforced clamp (industrial load-bearing)

Properties:
– Designed to secure open steel gratings to supporting steel structures without welding
– Provides strong holding force while allowing easy removal or repositioning
– Adjustable types accommodate various bar spacings and grating thicknesses
– Ideal for maintenance access flooring, platforms, and walkways

Coating Options:
– Zinc electroplated
– Hot-dip galvanized (ASTM A153 / DIN EN ISO 1461)
– Powder-coated (custom RAL colors available)
– Stainless steel natural finish

Add-ons:
– Can be supplied with bolts, nuts, and washers
– Available in contractor bulk packs
– Certification/load capacity test reports available on request

FAQ

Q: Which grating clamp do I need for 30 mm grating?
A: A standard two-part clip sized for 30 mm bearing bars. Confirm the beam flange thickness when you enquire so the correct bottom hook is supplied.

Q: Do you stock SS316 grating clips for marine areas?
A: Yes. SS316 sets are stocked for jetty, port and offshore platforms where salt spray corrodes galvanized clips within a few years.

Q: Can grating be fixed without welding?
A: Yes, that is the purpose of a grating clamp. The panel is held between saddle and hook, stays removable, and the galvanized coating is never burned off.

Q: What is the minimum order quantity?
A: No fixed minimum for stock sizes. Custom dimensions carry a small production minimum, usually one carton.